VHT Copper Gasket Cement
SKU: ESP21A000
VHT Copper Gasket Cement: VHT copper gasket cement, 11oz. High metallic formula for head, cork, paper and metal gaskets under heat and pressure. SKU ESP21A000.
Price:
€28.00€22.76 Inc VATExcl VAT
€28.00€22.76 Inc VATExcl VAT
Out of stock
Description
The VHT Copper Gasket Cement is a high metallic copper sealant made with the same ingredients as VHT high temperature coatings, for tight seals on cork, paper and metal gaskets.
Key features of the VHT Copper Gasket Cement
- High metallic copper formula
- Adhesion under severe pressure and heat
- Cork, paper and metal gaskets
- Tested on racing engines
- 11oz net weight
- SKU: ESP21A000
Specifications
| Brand | VHT |
|---|---|
| Part number | ESP21A000 |
| Product | Copper gasket cement, aerosol |
| VHT part | SP21A |
| Net weight | 11oz |
| Surfaces | Metal, rubber, cork, paper |
| Use at | 16-35°C |
| Assembly | Fit when tacky (about 5 minutes), tighten within 2 hours |
| Uses | Head, water pump, oil pan, cork, paper and metal gaskets, rubber hoses, threaded and AN fittings |
What it is for
The VHT Copper Gasket Cement sealant is used on head gaskets, water pump gaskets, oil pan gaskets, cork, paper and metal gaskets, rubber hoses, threaded fittings and AN fittings.
Performance
The VHT Copper Gasket Cement sealant keeps excellent adhesion under severe pressure and heat changes. VHT has tested it extensively on racing engines in the field and on dynamometers, where it met and exceeded the high compression and high temperature needs of very powerful engines.
Why a sealer helps
A thin coat of sealer fills small marks in the faces that a gasket alone may not seal, and holds the gasket in place during assembly. Keep sealant out of oil and coolant passages.
Using it
Clean both faces fully and spray an even coat of VHT Copper Gasket Cement on each side of the gasket, wait about 5 minutes until tacky, then fit and tighten within 2 hours to the factory figures.
Every VHT part is designed for a specific job, so read the fitment notes above and check them against your car before fitting. If anything is unclear, send us your vehicle details and we will help you choose the right part. Fit parts like this with the correct tools and torque settings, and check everything again after the first drive. Related parts from the same range are linked below.
If you are asking us about this item, quote the SKU ESP21A000 so we can match the exact part.
Related VHT products
See also: VHT CALIPER CLEANER, VHT SELF ETCHING PRIMER, VHT RUST CONVERTOR.
Check the Fitments tab before ordering, or contact us with your vehicle details.
Additional information
| Weight | 0.5 kg |
|---|---|
| Show Universal Products? | |
| Stock | |
| Universal |
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
-
Description
Description
The VHT Copper Gasket Cement is a high metallic copper sealant made with the same ingredients as VHT high temperature coatings, for tight seals on cork, paper and metal gaskets.
Key features of the VHT Copper Gasket Cement
- High metallic copper formula
- Adhesion under severe pressure and heat
- Cork, paper and metal gaskets
- Tested on racing engines
- 11oz net weight
- SKU: ESP21A000
Specifications
Brand VHT Part number ESP21A000 Product Copper gasket cement, aerosol VHT part SP21A Net weight 11oz Surfaces Metal, rubber, cork, paper Use at 16-35°C Assembly Fit when tacky (about 5 minutes), tighten within 2 hours Uses Head, water pump, oil pan, cork, paper and metal gaskets, rubber hoses, threaded and AN fittings What it is for
The VHT Copper Gasket Cement sealant is used on head gaskets, water pump gaskets, oil pan gaskets, cork, paper and metal gaskets, rubber hoses, threaded fittings and AN fittings.
Performance
The VHT Copper Gasket Cement sealant keeps excellent adhesion under severe pressure and heat changes. VHT has tested it extensively on racing engines in the field and on dynamometers, where it met and exceeded the high compression and high temperature needs of very powerful engines.
Why a sealer helps
A thin coat of sealer fills small marks in the faces that a gasket alone may not seal, and holds the gasket in place during assembly. Keep sealant out of oil and coolant passages.
Using it
Clean both faces fully and spray an even coat of VHT Copper Gasket Cement on each side of the gasket, wait about 5 minutes until tacky, then fit and tighten within 2 hours to the factory figures.
Every VHT part is designed for a specific job, so read the fitment notes above and check them against your car before fitting. If anything is unclear, send us your vehicle details and we will help you choose the right part. Fit parts like this with the correct tools and torque settings, and check everything again after the first drive. Related parts from the same range are linked below.
If you are asking us about this item, quote the SKU ESP21A000 so we can match the exact part.
Related VHT products
See also: VHT CALIPER CLEANER, VHT SELF ETCHING PRIMER, VHT RUST CONVERTOR.
Check the Fitments tab before ordering, or contact us with your vehicle details.
-
Additional information
Additional information
Weight 0.5 kg Show Universal Products? Stock Universal -
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “VHT Copper Gasket Cement” Cancel reply -
Fitments
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:














Reviews
There are no reviews yet.