Edelbrock Intake Manifold Gasket (B18C GSR-Engines)
SKU: 15042
Commonly Stocked Item - Please contact us to confirm stock
Edelbrock GSR Intake Gasket: Edelbrock 15042 one-piece intake manifold gasket for the 1994-01 Integra GSR B18C1. MP-2N composite with nitrile port beads. SKU 15042.
Price:
€33.00€26.83 Inc VATExcl VAT
€33.00€26.83 Inc VATExcl VAT
IN STOCK
Description
The Edelbrock GSR Intake Gasket is Edelbrock intake manifold gasket 15042 for the 1994-01 Integra GSR B18C1. It is the same gasket Edelbrock supplies with its own intakes and heads.
Key features of the Edelbrock GSR Intake Gasket
- One-piece intake manifold gasket
- MP-2N Micropore composite, solvent free
- Nitrile bead around each port opening
- High recovery under load, conforms to surface imperfections
- 10 bolt holes
- Matched to Edelbrock heads and manifolds
- SKU: 15042
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | 15042 |
| Part type | Engine intake manifold gasket |
| Application (Edelbrock) | 1994-01 Integra GSR B18C1 |
| Material | MP-2N Micropore synthetic fibre composite (paper type) |
| Port seal | Nitrile bead around each port |
| Configuration | One piece |
| Bolt holes | 10 |
| Colour | Green |
| Manifold bolt torque | 17 ft-lb, in the Edelbrock sequence |
Material
The Edelbrock GSR Intake Gasket uses Edelbrock MP-2N Micropore technology, a synthetic fibre composite made without solvents. It is impervious to most chemicals and has a high recovery under load, so when compressed it conforms to imperfections in the sealing surface even at lower flange pressures.
Port sealing
A nitrile bead around each port opening makes the Edelbrock GSR Intake Gasket seal even better, and the ports are matched to Edelbrock manifolds and cylinder heads for good flow.
Fitting
Clean all mating surfaces, stuffing paper towels into the open intake ports first so no debris enters the engine. Fit the Edelbrock GSR Intake Gasket and torque all intake manifold bolts to 17 ft-lb, following the sequence on the Edelbrock instruction sheet.
Always fit a new intake gasket when the manifold comes off, or when fitting an aftermarket manifold or throttle body.
If you are asking us about this item, quote the SKU 15042 so we can match the exact part.
Related Edelbrock products
See also: Edelbrock Intake Manifold Gasket (Honda B-Engines 87-02), DNJ Intake Manifold Gasket (B-Engines 87-01), DNJ Exhaust Header Gasket (B-Engines 87-02).
Check the Fitments tab and your engine code before ordering, or contact us with your engine details.
Additional information
| Weight | 1 kg |
|---|---|
| Show Universal Products? | |
| Engine Performance/Dress-Up | |
| Stock | |
| Auto Keywords | ansaugkrümmer, coletor de admissão, collecteur d'admission, collettore di aspirazione, dichtungen, el colector de admisión, emme manifoldu, gaskets, gaxetas, guarnizioni, indsugningsmanifold, inlaat spruitstuk, inlaatspruitstuk, intake manifold, joints, juntas, juntas de culata, kolektor dolotowy, pakkingen, sacà potrubÃ, Οι φλάντζες, πολλαπλή εισαγωγής |
| Universal | |
| Manufacturer |
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
-
Description
Description
The Edelbrock GSR Intake Gasket is Edelbrock intake manifold gasket 15042 for the 1994-01 Integra GSR B18C1. It is the same gasket Edelbrock supplies with its own intakes and heads.
Key features of the Edelbrock GSR Intake Gasket
- One-piece intake manifold gasket
- MP-2N Micropore composite, solvent free
- Nitrile bead around each port opening
- High recovery under load, conforms to surface imperfections
- 10 bolt holes
- Matched to Edelbrock heads and manifolds
- SKU: 15042
Specifications
Brand Edelbrock Part number 15042 Part type Engine intake manifold gasket Application (Edelbrock) 1994-01 Integra GSR B18C1 Material MP-2N Micropore synthetic fibre composite (paper type) Port seal Nitrile bead around each port Configuration One piece Bolt holes 10 Colour Green Manifold bolt torque 17 ft-lb, in the Edelbrock sequence Material
The Edelbrock GSR Intake Gasket uses Edelbrock MP-2N Micropore technology, a synthetic fibre composite made without solvents. It is impervious to most chemicals and has a high recovery under load, so when compressed it conforms to imperfections in the sealing surface even at lower flange pressures.
Port sealing
A nitrile bead around each port opening makes the Edelbrock GSR Intake Gasket seal even better, and the ports are matched to Edelbrock manifolds and cylinder heads for good flow.
Fitting
Clean all mating surfaces, stuffing paper towels into the open intake ports first so no debris enters the engine. Fit the Edelbrock GSR Intake Gasket and torque all intake manifold bolts to 17 ft-lb, following the sequence on the Edelbrock instruction sheet.
Always fit a new intake gasket when the manifold comes off, or when fitting an aftermarket manifold or throttle body.
If you are asking us about this item, quote the SKU 15042 so we can match the exact part.
Related Edelbrock products
See also: Edelbrock Intake Manifold Gasket (Honda B-Engines 87-02), DNJ Intake Manifold Gasket (B-Engines 87-01), DNJ Exhaust Header Gasket (B-Engines 87-02).
Check the Fitments tab and your engine code before ordering, or contact us with your engine details.
-
Additional information
Additional information
Weight 1 kg Show Universal Products? Engine Performance/Dress-Up Stock Auto Keywords ansaugkrümmer, coletor de admissão, collecteur d'admission, collettore di aspirazione, dichtungen, el colector de admisión, emme manifoldu, gaskets, gaxetas, guarnizioni, indsugningsmanifold, inlaat spruitstuk, inlaatspruitstuk, intake manifold, joints, juntas, juntas de culata, kolektor dolotowy, pakkingen, sacà potrubÃ, Οι φλάντζες, πολλαπλή εισαγωγής
Universal Manufacturer -
Reviews (0)
Reviews
There are no reviews yet.
-
Fitments
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
Honda Integra [DC2] (1994-2001)Honda Civic [EK] (1996-2000)
MCG Autostyling, Castle Street, Kells, Co Meath,
Ireland
046-9240899
Reviews
There are no reviews yet.