Auto-Styles Rolled Slash Cut Burnt End Exhaust Tip

Description

Auto-Styles PM-666BL Tip

The Auto-Styles PM-666BL Tip from Auto-Styles is a burnt end slant cut exhaust tip made from stainless steel. It is listed here as “Auto-Styles Rolled Slash Cut Burnt End Exhaust Tip”. A new exhaust tip is one of the simplest ways to tidy up the rear of a car and give the exhaust exit a sharper, more finished look.

About the Auto-Styles PM-666BL Tip

This tip clamps over the existing tailpipe. Check the dimensions and pictures against your car before ordering.

Key features

• Fitment: Universal
• Material: stainless steel
• Finish: burnt end
• Cut: slant cut
• Fitting: clamp-on
• SKU: PM-666BL

Will the Auto-Styles PM-666BL Tip fit my car?

Measure the outside diameter of your tailpipe and compare it with the inlet size shown in the product images. Check there is enough room between the tailpipe and the bumper or valance for the outlet. As a universal part, some modification or fabrication may be needed to fit.

If you are unsure whether it suits your car, get in touch with your car details and a photo of your exhaust.

Specifications

How to measure for an exhaust tip

Measure the outside diameter of the tailpipe where the tip will sit, using a vernier caliper or a tape wrapped around the pipe. If you use a tape, divide the circumference by 3.14 to get the diameter.

The inlet of the tip needs to match or be slightly larger than the tailpipe so it can be clamped or welded securely. Then measure the space between the tailpipe and the bumper or valance opening. This tells you how large the outlet can be and how far the tip can stick out.

Choosing a style

A slant (angled) cut is the more sporty of the two common cuts, giving a sharper look from the rear three-quarter view.

Outlet size changes the look more than anything else. A larger outlet fills a bigger bumper cut-out, while a smaller one suits a standard bumper. Single, twin and quad layouts should follow the number of tailpipes and the shape of the rear bumper.

Clamp-on or weld-on fitting

Clamp-on tips slide over the tailpipe and are held with a clamp or bolts, so they can be fitted without welding and removed later if needed.

Whichever method you use, make sure the tip is lined up square with the bumper and does not touch the bodywork. The exhaust moves on its rubber mounts when the engine is running.

Fitting and care for the Auto-Styles PM-666BL Tip

Clean the end of the tailpipe before fitting, line the tip up and make sure it is secure. Re-check it once the exhaust has been through a few heat cycles.

This tip has a burnt end finish. Stainless steel resists corrosion well, but road salt and soot will still dull any finish if they are left on the surface. Clean the tip regularly with a dedicated metal or wheel cleaner and a soft cloth to remove soot and road grime and keep it looking its best.

Give the rest of your exhaust an upgrade

Finishing the job properly? Take a look at our Straightflow exhaust fittings range. It covers pipes, bends, flex pipes, connectors, clamps and other specialist exhaust fittings, so you can find the parts to build, tidy up or repair your system and bring the whole exhaust together with your new tip.

Frequently asked questions

Does an exhaust tip change performance? An exhaust tip is mainly a cosmetic upgrade for the visible end of the exhaust. Any change in sound is usually small and depends on your system.

Can I fit the Auto-Styles PM-666BL Tip myself? Clamp-on tips can usually be fitted at home with basic tools. Always let the exhaust cool fully before working on it.

What size do I need? Match the inlet to the outside diameter of your tailpipe, then choose an outlet size that suits the space in your rear bumper.

Shopping for the Auto-Styles PM-666BL Tip? Compare it with the Auto-Styles Letterbox Style Exhaust Tip, Auto-Styles Letterbox 137mm Straight Exhaust Tip and Auto-Styles Rolled Long Burnt End Exhaust Tip, or browse our full range of exhaust tips.