ARP Extended Wheel Studs M12x1.5 (Honda 80-05)
SKU: 100-7711
Commonly Stocked Item - Please contact us to confirm stock
ARP Extended Studs Honda: ARP wheel studs – thread M12x1.5, wheel stud style Press-in, wheel stud thread size 12mm x 1.50 RH, knurl diameter (in.) 0.485 in.. SKU 100-7711.
The ARP Extended Studs Honda is listed here as “ARP Extended Wheel Studs M12x1.5 (Honda 80-05)”. Wheel studs carry the clamping load of the wheel nuts, so the thread, spline and length must suit the hub.
Price:
€59.00€47.97 Inc VATExcl VAT
€59.00€47.97 Inc VATExcl VAT
IN STOCK
Description
ARP Extended Studs Honda
The ARP Extended Studs Honda from ARP is part of our wheel studs range. Wheel studs carry the clamping load of the wheel nuts, so the thread, spline and length must suit the hub.
About the ARP Extended Studs Honda
ARP Extended Wheel Studs, Press-In, 12mm x 1.5 Right Hand Thread, Set of 4 pieces.
Why choose the ARP Extended Studs Honda
- Thread: M12x1.5
- Wheel stud style: Press-in
- Wheel stud thread size: 12mm x 1.50 RH
- Knurl diameter (in.): 0.485 in.
- Underhead length (in): 2.850 in.
- Knurl length (in): 0.275 in.
- SKU: 100-7711
Will the ARP Extended Studs Honda fit my car?
Check the thread, spline diameter and length needed for your hub and wheels before buying. If you are unsure whether the ARP Extended Studs Honda suits your car, check the fitment details on this page or get in touch with the part number and your car details.
Specifications
| Brand | ARP |
|---|---|
| Part number / SKU | 100-7711 |
| Thread | M12x1.5 |
| Wheel stud style | Press-in |
| Wheel stud thread size | 12mm x 1.50 RH |
| Knurl diameter (in.) | 0.485 in. |
| Underhead length (in) | 2.850 in. |
| Knurl length (in) | 0.275 in. |
| Quick-start nose | Yes |
| Quantity | Sold as a set of 4. |
| Notes | Fits most 1980-2005 Honda Models |
Choosing wheel studs
Wheel studs are pressed into the hub flange and held by a knurled spline. The spline diameter must match the hole in the hub, and the length should give full thread engagement with your wheel nuts, plus extra if you run spacers. Longer studs are popular for track use and quick wheel changes.
Fitting
Studs are usually pressed in from the back of the hub. After fitting, check each stud sits fully home and torque the wheel nuts to the handbook figure.
Shopping for the ARP Extended Studs Honda? Compare it with the ARP Replacement Wheel Studs M12x1.5 (Honda 80-05), QSP Conversion Studding M12x1,5 (Universal) and QSP Studbolt M12x1.5 Length 63mm 14.2mm Spline (Universal), or browse our full range of wheel nuts, studs and bolts.
Pairs well with
Matching parts for the ARP Extended Studs Honda are linked below, along with cleaning products to keep the finish looking its best.
Additional information
| Weight | 1 kg |
|---|---|
| Show Universal Products? | |
| Wheels & Tires | |
| Stock | |
| Universal | |
| Manufacturer |
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
-
Description
Description
ARP Extended Studs Honda
The ARP Extended Studs Honda from ARP is part of our wheel studs range. Wheel studs carry the clamping load of the wheel nuts, so the thread, spline and length must suit the hub.
About the ARP Extended Studs Honda
ARP Extended Wheel Studs, Press-In, 12mm x 1.5 Right Hand Thread, Set of 4 pieces.
Why choose the ARP Extended Studs Honda
- Thread: M12x1.5
- Wheel stud style: Press-in
- Wheel stud thread size: 12mm x 1.50 RH
- Knurl diameter (in.): 0.485 in.
- Underhead length (in): 2.850 in.
- Knurl length (in): 0.275 in.
- SKU: 100-7711
Will the ARP Extended Studs Honda fit my car?
Check the thread, spline diameter and length needed for your hub and wheels before buying. If you are unsure whether the ARP Extended Studs Honda suits your car, check the fitment details on this page or get in touch with the part number and your car details.
Specifications
Brand ARP Part number / SKU 100-7711 Thread M12x1.5 Wheel stud style Press-in Wheel stud thread size 12mm x 1.50 RH Knurl diameter (in.) 0.485 in. Underhead length (in) 2.850 in. Knurl length (in) 0.275 in. Quick-start nose Yes Quantity Sold as a set of 4. Notes Fits most 1980-2005 Honda Models Choosing wheel studs
Wheel studs are pressed into the hub flange and held by a knurled spline. The spline diameter must match the hole in the hub, and the length should give full thread engagement with your wheel nuts, plus extra if you run spacers. Longer studs are popular for track use and quick wheel changes.
Fitting
Studs are usually pressed in from the back of the hub. After fitting, check each stud sits fully home and torque the wheel nuts to the handbook figure.
Shopping for the ARP Extended Studs Honda? Compare it with the ARP Replacement Wheel Studs M12x1.5 (Honda 80-05), QSP Conversion Studding M12x1,5 (Universal) and QSP Studbolt M12x1.5 Length 63mm 14.2mm Spline (Universal), or browse our full range of wheel nuts, studs and bolts.
Pairs well with
Matching parts for the ARP Extended Studs Honda are linked below, along with cleaning products to keep the finish looking its best.
-
Additional information
Additional information
Weight 1 kg Show Universal Products? Wheels & Tires Stock Universal Manufacturer -
Reviews (0)
Reviews
There are no reviews yet.
-
Fitments
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
Honda CR-Z (2010+)Honda S2000 [AP1/AP2] (1999-2009)Honda Prelude (1997-2001)Honda Prelude [BB1-BB9] (1992-1996)Honda Integra [DC5] (2001-2006)Honda Integra [DC2] (1994-2001)Honda CRX [ED] (1983-1993)Honda Civic [FN/FN2] (2005-2012)Honda Civic [EP/EP3] (2001-2005)Honda Civic [EK] (1996-2000)Honda Civic [EG/EG6] (1992-1995)Honda Civic [EF/EF9] (1988-1992)Honda Accord [CL9] (2008+)Honda Accord [Cl7] (2004-2008)Honda Accord [CL1] (1998-2004)
MCG Autostyling, Castle Street, Kells, Co Meath,
Ireland
046-9240899
Reviews
There are no reviews yet.