Spoon 3mm TwinBlock Inner Spacers (Caliper Required)

Description

Spoon Twinblock Spacers

The Spoon Twinblock Spacers from Spoon is part of our wheel spacers range. Wheel spacers move the wheel outward to fill the arch, correct offset or clear larger brakes.

About the Spoon Twinblock Spacers

Spoon 3mm TwinBlock Inner Spacers (Caliper Required) These spacers are required for the installation of the twin block calipers on the 96 Spec DC2, EK4 and EG6. They are mounted on the inside of the disc to space it away from the hub sufficiently to offer a central disc alignment with the caliper.

Why choose the Spoon Twinblock Spacers

• SKU: 45250-TO3AL

Will the Spoon Twinblock Spacers fit my car?

Check the PCD, centre bore and spacer thickness for your car, and make sure the bolts or studs give enough thread engagement. If you are unsure whether the Spoon Twinblock Spacers suits your car, check the fitment details on this page or get in touch with the part number and your car details.

Specifications

Hubcentric versus universal spacers

Hubcentric spacers have a spigot that locates on the hub and a matching recess for the wheel, so the wheel stays centred on the hub rather than relying on the nuts or bolts. Universal spacers have a larger bore and suit more cars, but spigot rings are recommended to keep the wheel centred.

Bolts, studs and thread engagement

Thin spacers often need longer wheel bolts or studs so the thread engagement stays the same as standard. Thicker bolt-on spacers bolt to the hub and then carry their own studs for the wheel. Always torque everything to the handbook figure and re-check after the first short drive.

Pairs well with

Matching parts for the Spoon Twinblock Spacers are linked below, along with cleaning products to keep the finish looking its best.