Mugen – M12x1.5 Racing Wheel Nut Honda – (Length 28mm)

Description

Mugen M12x1.5 Nut 28mm

The Mugen M12x1.5 Nut 28mm from Mugen is part of our wheel nuts range. Wheel nuts hold the wheel to the hub, so the thread size and seat type have to match your car and wheels exactly.

About the Mugen M12x1.5 Nut 28mm

Mugen – M12x1.5 Racing Wheel Nut Honda – (Length 28mm) High-strength SCM435 chromium-molybdenum steel wheel nuts in a through-type design. Tapered type — not compatible with standard aluminium wheels

Why choose the Mugen M12x1.5 Nut 28mm

• Thread: M12x1.5
• Length / thickness: 28mm
• SKU: 08183-XG8-K2S0

Will the Mugen M12x1.5 Nut 28mm fit my car?

Check the thread size (for example M12x1.5 or M12x1.25) and the seat type of your wheels before buying. If you are unsure whether the Mugen M12x1.5 Nut 28mm suits your car, check the fitment details on this page or get in touch with the part number and your car details.

Specifications

Seat types explained

Wheel nuts come with different seats: conical (60 degree taper) is the most common on aftermarket wheels, while many OE wheels use a ball (radius) or flat seat. Using the wrong seat type means the nut will not clamp the wheel properly, so always match the nut to the wheel, not just the car.

Fitting and torque

Tighten wheel nuts by hand first, then torque them in a star pattern to the figure in your handbook. Re-check the torque after the first 50 to 100 km, especially with new wheels. Open-ended nuts suit longer studs, while closed-ended nuts keep the stud threads clean.

Shopping for the Mugen M12x1.5 Nut 28mm? Compare it with the Mugen – M12x1.5 Racing Wheel Nut Honda – (Length 40mm), Mugen – Wheel Nuts M12 x 1.5 Black Chrome – Set of 5 and Mugen – Heptagon Seven Sided Wheel Nuts Set M12X1.5 Most Honda Models, or browse our full range of wheel nuts, studs and bolts.

Pairs well with

Matching parts for the Mugen M12x1.5 Nut 28mm are linked below, along with cleaning products to keep the finish looking its best.