MTS Technik Comfort Inox Audi A1 Coilover Kit – 8X (2010-2019)
SKU: XMTSGWVW97-C-99
Comfort Inox MTS Technik coilover kit (XMTSGWVW97-C) for the Audi A1 (8X), lowering of 15 – 60 mm front and rear. Eibach springs. Special order.
Price:
€949.00€771.54 €854.10€694.39
€949.00€771.54 €854.10€694.39
Available on backorder
Description
Please note: the photo shown is a generic MTS Technik Comfort Inox kit image for illustration; the actual kit for your car may differ in spring, strut and top mount details.
The MTS Technik Comfort Inox Audi A1 Coilover Kit is a Comfort series height-adjustable coilover kit (MTS part XMTSGWVW97-C) for the Audi A1 (8X) (05/10 – 09/19), with inox (stainless steel) threaded housings and a lowering of 15 – 60 mm front and rear.
Comfort Inox Audi A1 Coilover Kit
Coilover Suspension Comfort MTS Technik – XMTSGWVW97-C
SKU: XMTSGWVW97-C-99 | MTS part number: XMTSGWVW97-C
Comfort: The Comfort series gives you ride-height adjustment without sacrificing comfort. It pairs everyday practicality with a wide adjustment range, keeping the car stable and responsive while keeping a comfortable daily ride.
MTS Technik coilovers let you set the ride height to suit your preference and road conditions, for example larger wheels in summer and smaller wheels in winter. Stiffer suspension makes the car more predictable and secure to drive.
Vehicle fitment
| Brand | Model | Engine | Year |
|---|---|---|---|
| Audi | A1 (8X) | 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI | 05/10 – 09/19 |
The same MTS Technik kit is also listed separately for: Audi A1 Sportback (8X); Seat Ibiza IV (6J/6P); Seat Ibiza IV SC (6J/6P); Seat Ibiza IV ST (6J/6P); Skoda Fabia II (542); Skoda Fabia II Combi (545); Skoda Fabia III (NJ); Skoda Fabia III Estate (NJ); Volkswagen Polo V (6R1/6C1).
Fitment details by vehicle
Before ordering, check the maximum permitted axle loads on your car’s VIN plate (1 = front axle, 2 = rear axle) against the figures below. If either is higher, this kit is not suitable for your car.
Audi A1 (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (05/10 – 09/19)
Car
| Make | Audi |
|---|---|
| Model | A1 (8X) |
| Type | 8X1, 8XK |
| Engine | 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI |
| Year | 05/10 – 09/19 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Audi A1 (8X): MTS Technik coilover kit for the Audi A1 (8X), lowering both axles between 15 – 60 mm. for years 05/10 – 09/19, engines: 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI.
Also fits (same MTS kit)
Audi A1 Sportback (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (09/11 – 09/19)
Car
| Make | Audi |
|---|---|
| Model | A1 Sportback (8X) |
| Type | 8XA, 8XF |
| Engine | 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI |
| Year | 09/11 – 09/19 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Audi A1 Sportback (8X): MTS Technik coilover kit for the Audi A1 Sportback (8X), lowering both axles between 15 – 60 mm. for years 09/11 – 09/19, engines: 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI.
Seat Ibiza IV (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI (03/08 – 12/17)
Car
| Make | Seat |
|---|---|
| Model | Ibiza IV (6J/6P) |
| Type | 6J5, 6P1 |
| Engine | 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI |
| Year | 03/08 – 12/17 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV (6J/6P), lowering both axles between 15 – 60 mm. for years 03/08 – 12/17, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI.
Seat Ibiza IV SC (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI (06/08 – 12/18)
Car
| Make | Seat |
|---|---|
| Model | Ibiza IV SC (6J/6P) |
| Type | 6J1, 6P5 |
| Engine | 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI |
| Year | 06/08 – 12/18 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV SC (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV SC (6J/6P), lowering both axles between 15 – 60 mm. for years 06/08 – 12/18, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI.
Seat Ibiza IV ST (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI (03/10 – 07/16)
Car
| Make | Seat |
|---|---|
| Model | Ibiza IV ST (6J/6P) |
| Type | 6J8, 6P8 |
| Engine | 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI |
| Year | 03/10 – 07/16 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV ST (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV ST (6J/6P), lowering both axles between 15 – 60 mm. for years 03/10 – 07/16, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI.
Skoda Fabia II (542) 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI (01/09 – 12/14)
Car
| Make | Skoda |
|---|---|
| Model | Fabia II (542) |
| Type | 542 |
| Engine | 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI |
| Year | 01/09 – 12/14 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA II (542): MTS Technik coilover kit for the Skoda Fabia II (542), lowering both axles between 15 – 60 mm. for years 01/09 – 12/14, engines: 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI.
Skoda Fabia II Combi (545) 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI (01/09 – 12/14)
Car
| Make | Skoda |
|---|---|
| Model | Fabia II Combi (545) |
| Type | 545 |
| Engine | 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI |
| Year | 01/09 – 12/14 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA II Combi (545): MTS Technik coilover kit for the Skoda Fabia II Combi (545), lowering both axles between 15 – 60 mm. for years 01/09 – 12/14, engines: 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI.
Skoda Fabia III (NJ) 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6 (08/14 – 06/21)
Car
| Make | Skoda |
|---|---|
| Model | Fabia III (NJ) |
| Type | NJ3 |
| Engine | 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6 |
| Year | 08/14 – 06/21 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA III (NJ): MTS Technik coilover kit for the Skoda Fabia III (NJ), lowering both axles between 15 – 60 mm. for years 08/14 – 06/21, engines: 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6.
Skoda Fabia III Estate (NJ) 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6 (08/14 – 12/22)
Car
| Make | Skoda |
|---|---|
| Model | Fabia III Estate (NJ) |
| Type | NJ5 |
| Engine | 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6 |
| Year | 08/14 – 12/22 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA III Estate (NJ): MTS Technik coilover kit for the Skoda Fabia III Estate (NJ), lowering both axles between 15 – 60 mm. for years 08/14 – 12/22, engines: 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6.
Volkswagen Polo V (6R1/6C1) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC (03/09 – 06/22)
Car
| Make | Volkswagen |
|---|---|
| Model | Polo V (6R1/6C1) |
| Type | 6R1, 6C1 |
| Engine | 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC |
| Year | 03/09 – 06/22 |
Tech specs
| Series | Comfort |
|---|---|
| Housing | inox |
| Max. Axle Load FA | -960 kg |
| Max. Axle Load RA | -840 kg |
| Lowering FA | 15 – 60 mm |
| Lowering RA | 15 – 60 mm |
| Camber / top mount FA | yes |
| Camber / top mount RA | no |
| Main spring rate | GWFE80 (50 N/mm) GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TUV Certificate | no |
Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Volkswagen POLO V (6R1/6C1): MTS Technik coilover kit for the Volkswagen Polo V (6R1/6C1), lowering both axles between 15 – 60 mm. for years 03/09 – 06/22, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC.

Car height adjustment
With a threaded surface, MTS Technik kits allow the height of the car to be changed according to the user’s preferences.

Eibach springs
Most MTS Technik coilover kits include springs designed and made by the prestigious German company Eibach. As a leading producer, for over 60 years Eibach has made springs for cars such as the Bugatti Veyron, and for F1, NASCAR and WRC. They offer balanced characteristics, only the highest quality steel, and the smallest production tolerances in the industry, along with the best corrosion protection and extraordinary durability – these are the features that Eibach also shares with MTS Technik coilover kits.
hexaCOIL spring perch
An innovative design of the spring perch results in stopping the problem of halting. This spring perch, offered in most kits, has been subjected to over 2 years of testing and research, to ensure trouble-free and safe use.


Comfort Series
The Comfort series suspension allows you to adjust the lowering of the car and improve handling, while maintaining as much comfort as possible.
Street Series
The Street series suspension is the default configuration suggested by MTS Technik engineers, guaranteeing a wide range of lowering and a balance between comfort and stiffness.


Stance Series
The Stance series suspension is an offer for those who prefer greater lowering and stiffer characteristics. A kit dedicated to more committed users and to those who like a close fit between the wheel and the wheel arch.
Damping characteristics
The characteristics of MTS Technik shock absorbers have been configured so that they perform optimally in each of the three available configurations. This is the result of a number of laboratory and road tests, preceded by a series of calculations made by their engineers. The main goal of this optimisation was to eliminate the need to change the shock absorbers when changing from one series to another.


Increased efficiency
Gas-oil twin-tube struts maintain their high efficiency even during heavy use.
Strict inspection
All components of MTS Technik coilover suspensions are subjected to thorough laboratory and road tests.


Camber top mounts / sway bar links
To make fitting easier on selected applications, where necessary the kits include sway bar links and/or camber plates to adjust wheel angles.
PUR bump stops
A guarantee of a longer lifespan compared with those made of rubber.


Reliability
MTS Technik coilover suspensions are covered by a 2-year warranty with no mileage limit.
Fitting the Comfort Inox Audi A1 Coilover Kit
The Comfort Inox Audi A1 Coilover Kit should be fitted by a qualified mechanic using the correct tools and torque settings. After fitting, set the ride height, have the wheel alignment checked and re-check all fixings after the first few hundred kilometres.
Lowering changes ground clearance and handling, so set the Comfort Inox Audi A1 Coilover Kit to a height that suits your wheels, tyres and the roads you drive on, and keep within the lowering range shown for your car above.
Comfort Inox Audi A1 Coilover Kit FAQs
Will the Comfort Inox Audi A1 Coilover Kit fit my car? Check the vehicle fitment table and the details for your car above, including the maximum axle loads and the numbered comments. If you are not sure, contact us with your registration and we will check before you order.
What is the MTS part number? This listing is MTS Technik part XMTSGWVW97-C (our SKU XMTSGWVW97-C-99).
Do you deliver? We deliver to addresses in Ireland and Northern Ireland only.
More Information
See the full range of MTS Technik coilover kits on the MTS Technik website.
Before You Order
Please check the fitment details above against your vehicle before ordering the Comfort Inox Audi A1 Coilover Kit. If you are unsure, contact MCG Autostyling with your registration and quote SKU XMTSGWVW97-C-99 so we can confirm the exact kit for you.
Related Parts
Browse more parts in Coilover & Sports Suspension, MTS Suspension, Suspension.
Ordering and delivery
This kit is a special-order item, ordered in from MTS Technik for you. Delivery to Ireland and Northern Ireland.
Additional information
| Vehicle Fitment | Audi A1 (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (05/10 – 09/19) |
|---|---|
| Series | |
| Housing | |
| Max. Axle Load FA | |
| Max. Axle Load RA | |
| Lowering FA | |
| Lowering RA | |
| Camber / top mount FA | |
| Camber / top mount RA | |
| TUV Certificate | |
| Coilover Main Spring (Front) | |
| Main spring rate | GWFE12HA (17 – 27 – 37,5 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| Show Universal Products? |
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
-
Description
Description
Please note: the photo shown is a generic MTS Technik Comfort Inox kit image for illustration; the actual kit for your car may differ in spring, strut and top mount details.
The MTS Technik Comfort Inox Audi A1 Coilover Kit is a Comfort series height-adjustable coilover kit (MTS part XMTSGWVW97-C) for the Audi A1 (8X) (05/10 – 09/19), with inox (stainless steel) threaded housings and a lowering of 15 – 60 mm front and rear.
Comfort Inox Audi A1 Coilover Kit
Coilover Suspension Comfort MTS Technik – XMTSGWVW97-C
SKU: XMTSGWVW97-C-99 | MTS part number: XMTSGWVW97-C
Comfort: The Comfort series gives you ride-height adjustment without sacrificing comfort. It pairs everyday practicality with a wide adjustment range, keeping the car stable and responsive while keeping a comfortable daily ride.
MTS Technik coilovers let you set the ride height to suit your preference and road conditions, for example larger wheels in summer and smaller wheels in winter. Stiffer suspension makes the car more predictable and secure to drive.
Vehicle fitment
Brand Model Engine Year Audi A1 (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI 05/10 – 09/19 The same MTS Technik kit is also listed separately for: Audi A1 Sportback (8X); Seat Ibiza IV (6J/6P); Seat Ibiza IV SC (6J/6P); Seat Ibiza IV ST (6J/6P); Skoda Fabia II (542); Skoda Fabia II Combi (545); Skoda Fabia III (NJ); Skoda Fabia III Estate (NJ); Volkswagen Polo V (6R1/6C1).
Fitment details by vehicle
Before ordering, check the maximum permitted axle loads on your car’s VIN plate (1 = front axle, 2 = rear axle) against the figures below. If either is higher, this kit is not suitable for your car.
Audi A1 (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (05/10 – 09/19)
Car
Make Audi Model A1 (8X) Type 8X1, 8XK Engine 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI Year 05/10 – 09/19 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Audi A1 (8X): MTS Technik coilover kit for the Audi A1 (8X), lowering both axles between 15 – 60 mm. for years 05/10 – 09/19, engines: 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI.
Also fits (same MTS kit)
Audi A1 Sportback (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (09/11 – 09/19)
Car
Make Audi Model A1 Sportback (8X) Type 8XA, 8XF Engine 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI Year 09/11 – 09/19 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Audi A1 Sportback (8X): MTS Technik coilover kit for the Audi A1 Sportback (8X), lowering both axles between 15 – 60 mm. for years 09/11 – 09/19, engines: 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI.
Seat Ibiza IV (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI (03/08 – 12/17)
Car
Make Seat Model Ibiza IV (6J/6P) Type 6J5, 6P1 Engine 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI Year 03/08 – 12/17 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV (6J/6P), lowering both axles between 15 – 60 mm. for years 03/08 – 12/17, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 LPG / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 LPG / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI / 1.9 TDI / 2.0 TDI.
Seat Ibiza IV SC (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI (06/08 – 12/18)
Car
Make Seat Model Ibiza IV SC (6J/6P) Type 6J1, 6P5 Engine 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI Year 06/08 – 12/18 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV SC (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV SC (6J/6P), lowering both axles between 15 – 60 mm. for years 06/08 – 12/18, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 LPG / 1.6 TDI.
Seat Ibiza IV ST (6J/6P) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI (03/10 – 07/16)
Car
Make Seat Model Ibiza IV ST (6J/6P) Type 6J8, 6P8 Engine 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI Year 03/10 – 07/16 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Seat IBIZA IV ST (6J/6P): MTS Technik coilover kit for the Seat Ibiza IV ST (6J/6P), lowering both axles between 15 – 60 mm. for years 03/10 – 07/16, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 TDI.
Skoda Fabia II (542) 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI (01/09 – 12/14)
Car
Make Skoda Model Fabia II (542) Type 542 Engine 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI Year 01/09 – 12/14 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA II (542): MTS Technik coilover kit for the Skoda Fabia II (542), lowering both axles between 15 – 60 mm. for years 01/09 – 12/14, engines: 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI.
Skoda Fabia II Combi (545) 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI (01/09 – 12/14)
Car
Make Skoda Model Fabia II Combi (545) Type 545 Engine 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI Year 01/09 – 12/14 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA II Combi (545): MTS Technik coilover kit for the Skoda Fabia II Combi (545), lowering both axles between 15 – 60 mm. for years 01/09 – 12/14, engines: 1.2 / 1.2 12V / 1.2 TDI / 1.2 TSI / 1.4 / 1.4 TDI / 1.4 TSI RS / 1.6 / 1.6 TDI / 1.9 TDI.
Skoda Fabia III (NJ) 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6 (08/14 – 06/21)
Car
Make Skoda Model Fabia III (NJ) Type NJ3 Engine 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6 Year 08/14 – 06/21 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA III (NJ): MTS Technik coilover kit for the Skoda Fabia III (NJ), lowering both axles between 15 – 60 mm. for years 08/14 – 06/21, engines: 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.4 TSI R5 / 1.6.
Skoda Fabia III Estate (NJ) 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6 (08/14 – 12/22)
Car
Make Skoda Model Fabia III Estate (NJ) Type NJ5 Engine 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6 Year 08/14 – 12/22 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Skoda FABIA III Estate (NJ): MTS Technik coilover kit for the Skoda Fabia III Estate (NJ), lowering both axles between 15 – 60 mm. for years 08/14 – 12/22, engines: 1.0 / 1.0 TSI / 1.2 TSI / 1.4 TDI / 1.6.
Volkswagen Polo V (6R1/6C1) 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC (03/09 – 06/22)
Car
Make Volkswagen Model Polo V (6R1/6C1) Type 6R1, 6C1 Engine 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC Year 03/09 – 06/22 Tech specs
Series Comfort Housing inox Max. Axle Load FA -960 kg Max. Axle Load RA -840 kg Lowering FA 15 – 60 mm Lowering RA 15 – 60 mm Camber / top mount FA yes Camber / top mount RA no Main spring rate GWFE80 (50 N/mm)
GWFE12HA (17 – 27 – 37,5 N/mm)Helper spring rate GWHE01 (20 N/mm) TUV Certificate no Comments
- 3 – Front and rear axle height adjustable (threaded shock absorber housing at the front; dampers, springs and height-adjustable elements at the rear).
- 21 – If the vehicle has factory sports suspension, the lowering will be correspondingly less than stated.
- 24 – When fitting, check the clearance between the tyre/rim and the suspension strut. The minimum permitted gap is 5 mm (0.2 in); otherwise use certified wheel spacers.
- 36 – Rear threaded adjuster block is mounted at the bottom.
- 73 – For easier height adjustment, remove the height adjuster, change the spring perch position, then refit the adjuster to the car.
Product description
Coilover Kit Comfort Volkswagen POLO V (6R1/6C1): MTS Technik coilover kit for the Volkswagen Polo V (6R1/6C1), lowering both axles between 15 – 60 mm. for years 03/09 – 06/22, engines: 1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC.

Car height adjustment
With a threaded surface, MTS Technik kits allow the height of the car to be changed according to the user’s preferences.

Eibach springs
Most MTS Technik coilover kits include springs designed and made by the prestigious German company Eibach. As a leading producer, for over 60 years Eibach has made springs for cars such as the Bugatti Veyron, and for F1, NASCAR and WRC. They offer balanced characteristics, only the highest quality steel, and the smallest production tolerances in the industry, along with the best corrosion protection and extraordinary durability – these are the features that Eibach also shares with MTS Technik coilover kits.
hexaCOIL spring perch
An innovative design of the spring perch results in stopping the problem of halting. This spring perch, offered in most kits, has been subjected to over 2 years of testing and research, to ensure trouble-free and safe use.


Comfort Series
The Comfort series suspension allows you to adjust the lowering of the car and improve handling, while maintaining as much comfort as possible.
Street Series
The Street series suspension is the default configuration suggested by MTS Technik engineers, guaranteeing a wide range of lowering and a balance between comfort and stiffness.


Stance Series
The Stance series suspension is an offer for those who prefer greater lowering and stiffer characteristics. A kit dedicated to more committed users and to those who like a close fit between the wheel and the wheel arch.
Damping characteristics
The characteristics of MTS Technik shock absorbers have been configured so that they perform optimally in each of the three available configurations. This is the result of a number of laboratory and road tests, preceded by a series of calculations made by their engineers. The main goal of this optimisation was to eliminate the need to change the shock absorbers when changing from one series to another.


Increased efficiency
Gas-oil twin-tube struts maintain their high efficiency even during heavy use.
Strict inspection
All components of MTS Technik coilover suspensions are subjected to thorough laboratory and road tests.


Camber top mounts / sway bar links
To make fitting easier on selected applications, where necessary the kits include sway bar links and/or camber plates to adjust wheel angles.
PUR bump stops
A guarantee of a longer lifespan compared with those made of rubber.


Reliability
MTS Technik coilover suspensions are covered by a 2-year warranty with no mileage limit.
Fitting the Comfort Inox Audi A1 Coilover Kit
The Comfort Inox Audi A1 Coilover Kit should be fitted by a qualified mechanic using the correct tools and torque settings. After fitting, set the ride height, have the wheel alignment checked and re-check all fixings after the first few hundred kilometres.
Lowering changes ground clearance and handling, so set the Comfort Inox Audi A1 Coilover Kit to a height that suits your wheels, tyres and the roads you drive on, and keep within the lowering range shown for your car above.
Comfort Inox Audi A1 Coilover Kit FAQs
Will the Comfort Inox Audi A1 Coilover Kit fit my car? Check the vehicle fitment table and the details for your car above, including the maximum axle loads and the numbered comments. If you are not sure, contact us with your registration and we will check before you order.
What is the MTS part number? This listing is MTS Technik part XMTSGWVW97-C (our SKU XMTSGWVW97-C-99).
Do you deliver? We deliver to addresses in Ireland and Northern Ireland only.
More Information
See the full range of MTS Technik coilover kits on the MTS Technik website.
Before You Order
Please check the fitment details above against your vehicle before ordering the Comfort Inox Audi A1 Coilover Kit. If you are unsure, contact MCG Autostyling with your registration and quote SKU XMTSGWVW97-C-99 so we can confirm the exact kit for you.
Related Parts
Browse more parts in Coilover & Sports Suspension, MTS Suspension, Suspension.
Ordering and delivery
This kit is a special-order item, ordered in from MTS Technik for you. Delivery to Ireland and Northern Ireland.
-
Additional information
Additional information
Vehicle Fitment Audi A1 (8X) 1.0 TFSI / 1.2 TFSI / 1.4 TDI / 1.4 TFSI / 1.4 TSI / 1.6 TDI / 1.8 TFSI / 2.0 TDI (05/10 – 09/19)
Series Housing Max. Axle Load FA Max. Axle Load RA Lowering FA Lowering RA Camber / top mount FA Camber / top mount RA TUV Certificate Coilover Main Spring (Front) Main spring rate GWFE12HA (17 – 27 – 37,5 N/mm)
Helper spring rate GWHE01 (20 N/mm)
Show Universal Products? -
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “MTS Technik Comfort Inox Audi A1 Coilover Kit – 8X (2010-2019)” Cancel reply -
Fitments
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
Audi A1 [8X] (2008-2018)













Reviews
There are no reviews yet.