HYBRID RACING 3″ VELOCITY STACK AND FILTER

Description

The Hybrid Racing Velocity Stack kit is a 6in to 3in velocity stack with a cone filter and hose clamp, for the end of a 3in cold air intake.

Key features of the Hybrid Racing Velocity Stack

• 6in inlet to 3in outlet velocity stack
• Light, injection-moulded construction
• 7.5in wide, 5in tall cone filter
• 6in hose clamp included
• SKU: HYB-VSF-01-02

Specifications

Why a velocity stack

A curved bellmouth at the inlet of each intake runner can raise flow efficiency by as much as 70% in the right conditions. The Hybrid Racing Velocity Stack adds a similar bellmouth to the end of your cold air intake.

Fitting

To fit the Hybrid Racing Velocity Stack, join the velocity stack to your 3in intake with a 3in silicone coupler and two hose clamps, then clamp the filter on with the 6in clamp supplied.

Always run the filter

Hybrid Racing recommends always running the Hybrid Racing Velocity Stack with the filter fitted, rather than an open velocity stack.

Every Hybrid Racing part is designed for a specific job, so read the fitment notes above and check them against your car before fitting. If anything is unclear, send us your vehicle details and we will help you choose the right part. Fit parts like this with the correct tools and torque settings, and check everything again after the first drive. Related parts from the same range are linked below.

If you are asking us about this item, quote the SKU HYB-VSF-01-02 so we can match the exact part.

Related Hybrid Racing products

See also: HYBRID RACING K-SERIES SWAP RADIATOR HOSES (K-SWAP), HYBRID RACING K-SERIES FUEL RAIL & FITTINGS (01-05 HONDA CIVIC EP3 02-06 Integra DC5), Hybrid Racing Unibody Fuel Pressure Regulator (K-Swap & Universal).

Check the Fitments tab before ordering, or contact us with your vehicle details.