HOP GENUINE HONDA FLYWHEEL PILOT SPIGOT BUSH BEARING K-SERIES

Description

The Honda K Series Pilot Bearing is an original Honda part, Honda part number 22103-PNA-003 (Bush (21X24X8), pilot bearing), the flywheel pilot (spigot) bush for K-series gearboxes, measuring 21 x 24 x 8mm.

Key features of the Honda K Series Pilot Bearing

• OEM Honda part number 22103-PNA-003
• Honda catalogue description: Bush (21X24X8), pilot bearing
• Size: 21mm x 24mm x 8mm
• Application: Honda K-series gearboxes (Civic and Integra Type R)
• SKU: 22103-PNA-003

Specifications

What it does

The pilot bush sits in the centre of the crankshaft or flywheel and supports the end of the gearbox input shaft. A worn bush can cause noise, vibration and difficult gear changes.

When to replace it

The bush is often not included in clutch kits from Honda or Exedy, but it is well worth changing while the gearbox is off for a clutch or flywheel job. Order the Honda K Series Pilot Bearing by its Honda part number 22103-PNA-003 to be sure of the correct item.

Fitment

The Honda K Series Pilot Bearing is listed for K-series gearboxes as found in the Civic and Integra Type R. Honda part numbers are often shared across several models and engines, so check the Fitments tab or quote your chassis and engine code when you contact us.

Why OEM Honda

An OEM Honda part is made to the same specification as the part fitted at the factory, so the Honda K Series Pilot Bearing matches the original for size, material and fit. Fit it following the Honda workshop manual procedure and torque figures for your engine.

If you are asking us about this item, quote the SKU 22103-PNA-003 so we can match the exact part.

Related OEM Honda products

See also: HOP THROTTLE BODY MOUNTING GASKET K-SERIES CIVIC, HOP Honda Thermostat Civic Integra K-Series K20A, HOP Honda Cam Timing Chain K-Series K24.

Check the Fitments tab, or contact us with your vehicle details, before ordering.