SRS Catback System Stainless Steel G55 (CRX 87-93)

Description

This crx catback is the genuine SRS G55 stainless cat-back for CRX 87-93. SKU CBS-CRX88-G55. SUS 304 polished, 60.5 mm pipe, 102 mm slant tip, silencer can be taken out (adjustable). Gaskets and mounting hardware are in the box.

CRX catback specs

Direct-fit catback: pipe 60.5 mm, tip 102 mm, slant, removable silencer. A crx catback is mid-pipe plus rear section, not an axleback-only kit. Bolt it to the original points on a cold engine and torque evenly.

Pair this crx catback with SRS exhaust bolt and nut hardware, and the exhaust silencer insert if you want it quieter. Genuine SRS from MCG Autostyling in Kells, Co. Meath, with fast delivery across Ireland.

This CRX catback is listed for CRX 87-93. Confirm exact vehicles on the Fitments tab before ordering.

After the first heat cycle, re-check flange torque on a cold engine. Keep the silencer in unless you want it louder. Measure the 102 mm tip against the bumper before you order.

Fitting notes: allow the exhaust to cool fully, support the system on stands, and start every joint loosely before final tightening so the rear section hangs square in the bumper cut-out. Replace the supplied gaskets rather than reusing old ones, and check the rubber hangers for splits while the car is on the lift. Owners who track the car should inspect the tip clearance again after a few hundred kilometres, because heat cycling can settle the mounts.