Description
The Cometic PRO2003B is a StreetPro Cylinder Block Gasket Set from Cometic, part number PRO2003B, listed for B-Engines 87-01. This page gathers the details from the existing MCG Autostyling listing so you can check the Cometic PRO2003B against your car before you order.
Cometic PRO2003B Details
- Type: StreetPro Cylinder Block Gasket Set
- Part number: PRO2003B
- Make: Cometic
- Engine Performance/Dress-Up: Internals (MCG attribute)
- Listed fitment: B-Engines 87-01
What the listing says about the Cometic PRO2003B
- Cometic Gaskets StreetPro Cylinder Block Gasket Set PRO2003B
- – 1x Engine Oil Pan Gasket – 1x Water Pump Gasket – 1x Crankshaft Seal Gearbox Side – 1x Crankshaft Seal Oil Pump Side
What a StreetPro Cylinder Block Gasket Set does
A gasket seals the joint between two parts so that gas, oil or coolant cannot escape at the joint. The StreetPro Cylinder Block Gasket Set is shaped to suit a particular flange, so the bolt pattern and port shape should match the parts it sits between.
The Cometic PRO2003B is listed under part number PRO2003B. Part numbers are the most reliable way to match a replacement, because two parts that look alike can differ in size, connection or mounting. If you have the old part in your hand, compare its markings with the PRO2003B code, and compare the photos on this page with what is on your car.
Choosing the right StreetPro Cylinder Block Gasket Set
Start with the Fitments tab on this page. It lists the makes, models and years that the Cometic PRO2003B is matched to on the MCG Autostyling system. Vehicle specifications can change by market, model year, engine code, body style and trim level, so a car that looks the same from the outside may still need a different part. Check your engine code and chassis code as well as the model name.
If your car has been modified, or has had parts swapped from another model, the part you need may not be the one the factory fitted. In that case, compare the StreetPro Cylinder Block Gasket Set you are removing with the details and photos on this page before you order. If you are still unsure, contact MCG Autostyling with your vehicle details and registration, and the team can check the Cometic PRO2003B against your car.
Fitting the Cometic PRO2003B
Before fitting a new StreetPro Cylinder Block Gasket Set, clean both mating faces, remove all traces of the old gasket, and check the faces for damage or warping. Tighten the fixings evenly and to the torque the vehicle or part maker gives, and recheck for leaks once the engine has been run up to temperature.
Work on a level surface with the car safely supported, and use the correct tools and torque settings for your vehicle. Follow any instructions supplied with the Cometic PRO2003B. If you are not confident doing the work yourself, have the part fitted by a qualified mechanic or fitter. When the part arrives, check it against this listing before you start work, and keep the packaging until you are happy that everything is correct.
Cometic PRO2003B questions
Will the Cometic PRO2003B fit my car? Check the Fitments tab and compare part number PRO2003B with the part you are replacing. If they do not match, or your car is not listed, ask before ordering.
What should I quote if I contact MCG Autostyling? Quote part number PRO2003B and the name Cometic Gaskets StreetPro Cylinder Block Gasket Set (B-Engines 87-01), along with your vehicle details, so the team can find the right information quickly.
Is there anything else I should replace at the same time? That depends on the job. Fixings, seals and related wear parts are often worth checking while the area is apart. The related parts below are a good place to start.
Related Cometic parts
For related parts, see Cometic Gaskets MLS Exhaust Header Gasket (B-Engines 87-02), Cometic Gaskets MLS Cylinder Head Gasket 81.5/.030″ (B-Engines 87-01) and Cometic Gaskets MLS Cylinder Head Gasket 75.5/.030″ (D-Engines 91-01).
Browse the full Cometic range at MCG Autostyling, or use the vehicle filter to find other parts for your car.
Fitments: B-Engines 87-01.
Additional information
| Weight | 1 kg |
|---|---|
| Show Universal Products? | |
| Engine Performance/Dress-Up | |
| Stock | |
| Auto Keywords | dichtungen, gaskets, gaxetas, guarnizioni, joints, juntas, juntas de culata, pakkingen, Οι φλάντζες |
| Universal | |
| Manufacturer |
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
-
Description
Description
The Cometic PRO2003B is a StreetPro Cylinder Block Gasket Set from Cometic, part number PRO2003B, listed for B-Engines 87-01. This page gathers the details from the existing MCG Autostyling listing so you can check the Cometic PRO2003B against your car before you order.
Cometic PRO2003B Details
- Type: StreetPro Cylinder Block Gasket Set
- Part number: PRO2003B
- Make: Cometic
- Engine Performance/Dress-Up: Internals (MCG attribute)
- Listed fitment: B-Engines 87-01
What the listing says about the Cometic PRO2003B
- Cometic Gaskets StreetPro Cylinder Block Gasket Set PRO2003B
- – 1x Engine Oil Pan Gasket – 1x Water Pump Gasket – 1x Crankshaft Seal Gearbox Side – 1x Crankshaft Seal Oil Pump Side
What a StreetPro Cylinder Block Gasket Set does
A gasket seals the joint between two parts so that gas, oil or coolant cannot escape at the joint. The StreetPro Cylinder Block Gasket Set is shaped to suit a particular flange, so the bolt pattern and port shape should match the parts it sits between.
The Cometic PRO2003B is listed under part number PRO2003B. Part numbers are the most reliable way to match a replacement, because two parts that look alike can differ in size, connection or mounting. If you have the old part in your hand, compare its markings with the PRO2003B code, and compare the photos on this page with what is on your car.
Choosing the right StreetPro Cylinder Block Gasket Set
Start with the Fitments tab on this page. It lists the makes, models and years that the Cometic PRO2003B is matched to on the MCG Autostyling system. Vehicle specifications can change by market, model year, engine code, body style and trim level, so a car that looks the same from the outside may still need a different part. Check your engine code and chassis code as well as the model name.
If your car has been modified, or has had parts swapped from another model, the part you need may not be the one the factory fitted. In that case, compare the StreetPro Cylinder Block Gasket Set you are removing with the details and photos on this page before you order. If you are still unsure, contact MCG Autostyling with your vehicle details and registration, and the team can check the Cometic PRO2003B against your car.
Fitting the Cometic PRO2003B
Before fitting a new StreetPro Cylinder Block Gasket Set, clean both mating faces, remove all traces of the old gasket, and check the faces for damage or warping. Tighten the fixings evenly and to the torque the vehicle or part maker gives, and recheck for leaks once the engine has been run up to temperature.
Work on a level surface with the car safely supported, and use the correct tools and torque settings for your vehicle. Follow any instructions supplied with the Cometic PRO2003B. If you are not confident doing the work yourself, have the part fitted by a qualified mechanic or fitter. When the part arrives, check it against this listing before you start work, and keep the packaging until you are happy that everything is correct.
Cometic PRO2003B questions
Will the Cometic PRO2003B fit my car? Check the Fitments tab and compare part number PRO2003B with the part you are replacing. If they do not match, or your car is not listed, ask before ordering.
What should I quote if I contact MCG Autostyling? Quote part number PRO2003B and the name Cometic Gaskets StreetPro Cylinder Block Gasket Set (B-Engines 87-01), along with your vehicle details, so the team can find the right information quickly.
Is there anything else I should replace at the same time? That depends on the job. Fixings, seals and related wear parts are often worth checking while the area is apart. The related parts below are a good place to start.
Related Cometic parts
For related parts, see Cometic Gaskets MLS Exhaust Header Gasket (B-Engines 87-02), Cometic Gaskets MLS Cylinder Head Gasket 81.5/.030″ (B-Engines 87-01) and Cometic Gaskets MLS Cylinder Head Gasket 75.5/.030″ (D-Engines 91-01).
Browse the full Cometic range at MCG Autostyling, or use the vehicle filter to find other parts for your car.
Fitments: B-Engines 87-01.
-
Additional information
Additional information
Weight 1 kg Show Universal Products? Engine Performance/Dress-Up Stock Auto Keywords dichtungen, gaskets, gaxetas, guarnizioni, joints, juntas, juntas de culata, pakkingen, Οι φλάντζες
Universal Manufacturer -
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Cometic Gaskets StreetPro Cylinder Block Gasket Set (B-Engines 87-01)” Cancel reply -
Fitments
THIS PRODUCT FITS ON THE FOLLOWING CAR MODELS:
Honda Integra [DC2] (1994-2001)Honda CRX [ED] (1983-1993)Honda Civic [EK] (1996-2000)Honda Civic [EG/EG6] (1992-1995)Honda Civic [EF/EF9] (1988-1992)














Reviews
There are no reviews yet.