CARBON CULTURE – Honda Ep / DC5 Lowering Springs (50mm)

Description

The Carbon Culture DC5 Lowering Springs is a Honda Ep / DC5 Lowering Springs from Carbon Culture, part number CCSRING002N, listed for the vehicles on the Fitments tab. This page gathers the details from the existing MCG Autostyling listing so you can check the Carbon Culture DC5 Lowering Springs against your car before you order.

Carbon Culture DC5 Lowering Springs Details

• Type: Honda Ep / DC5 Lowering Springs
• Part number: CCSRING002N
• Make: Carbon Culture
• Listed fitment: See the Fitments tab

What a Honda Ep / DC5 Lowering Springs does

Lowering springs replace the factory springs to lower the car’s ride height by the amount stated in the listing. A lower ride height changes the suspension geometry, so a wheel alignment check is needed after fitting.

The Carbon Culture DC5 Lowering Springs is listed under part number CCSRING002N. Part numbers are the most reliable way to match a replacement, because two parts that look alike can differ in size, connection or mounting. If you have the old part in your hand, compare its markings with the CCSRING002N code, and compare the photos on this page with what is on your car.

Choosing the right Honda Ep / DC5 Lowering Springs

Start with the Fitments tab on this page. It lists the makes, models and years that the Carbon Culture DC5 Lowering Springs is matched to on the MCG Autostyling system. Vehicle specifications can change by market, model year, engine code, body style and trim level, so a car that looks the same from the outside may still need a different part. Check your engine code and chassis code as well as the model name.

If your car has been modified, or has had parts swapped from another model, the part you need may not be the one the factory fitted. In that case, compare the Honda Ep / DC5 Lowering Springs you are removing with the details and photos on this page before you order. If you are still unsure, contact MCG Autostyling with your vehicle details and registration, and the team can check the Carbon Culture DC5 Lowering Springs against your car.

Fitting the Carbon Culture DC5 Lowering Springs

Springs should be fitted with a proper spring compressor or by a qualified fitter. Check that your dampers suit the new ride height, and recheck the alignment once the springs have settled.

Work on a level surface with the car safely supported, and use the correct tools and torque settings for your vehicle. Follow any instructions supplied with the Carbon Culture DC5 Lowering Springs. If you are not confident doing the work yourself, have the part fitted by a qualified mechanic or fitter. When the part arrives, check it against this listing before you start work, and keep the packaging until you are happy that everything is correct.

Carbon Culture DC5 Lowering Springs questions

Will the Carbon Culture DC5 Lowering Springs fit my car? Check the Fitments tab and compare part number CCSRING002N with the part you are replacing. If they do not match, or your car is not listed, ask before ordering.

What should I quote if I contact MCG Autostyling? Quote part number CCSRING002N and the name CARBON CULTURE – Honda Ep / DC5 Lowering Springs (50mm), along with your vehicle details, so the team can find the right information quickly.

Is there anything else I should replace at the same time? That depends on the job. Fixings, seals and related wear parts are often worth checking while the area is apart. The related parts below are a good place to start.

Related Carbon Culture parts

For related parts, see CARBON CULTURE – Altezza Neo / Lexus IS200 Lowering Springs (55mm), CARBON CULTURE – Honda Accord CL7 Lowering Springs (50mm) and CARBON CULTURE – Honda Civic Lowering Springs EG/EK/DC2 (55mm).

Browse the full Carbon Culture range at MCG Autostyling, or use the vehicle filter to find other parts for your car.

Fitments: See the Fitments tab.