Ashuki Wheel Bearing Rear (Prelude 97-01 2.2i) (H310-31)

Description

The Ashuki H310-31 is a Wheel Bearing Rear from Ashuki, part number H310-31. It fits Honda Prelude (1997-2001). Check the Ashuki H310-31 against your car before you order.

Ashuki H310-31 Details

• Type: Wheel Bearing Rear
• Part number: H310-31
• Make: Ashuki
• Spare/Service Parts: Chassis
• Fits: Honda Prelude (1997-2001)

What the listing says about the Ashuki H310-31

• – PCD: 5×114.3 – Both left and right side are the same – Includes ABS Ring

What a Wheel Bearing Rear does

A wheel bearing lets the hub turn smoothly on its axle while carrying the weight of the car and the loads from cornering and braking. A worn bearing usually shows itself as a hum or rumble that changes with speed, or as play in the wheel.

The Ashuki H310-31 is listed under part number H310-31. Part numbers are the most reliable way to match a replacement, because two parts that look alike can differ in size, connection or mounting. If you have the old part in your hand, compare its markings with the H310-31 code, and compare the photos on this page with what is on your car.

Choosing the right Wheel Bearing Rear

Start with the vehicle. The Ashuki H310-31 fits Honda Prelude (1997-2001). Vehicle specifications can change by market, model year, engine code, body style and trim level, so a car that looks the same from the outside may still need a different part. Check your engine code and chassis code as well as the model name.

If your car has been modified, or has had parts swapped from another model, the part you need may not be the one the factory fitted. In that case, compare the Wheel Bearing Rear you are removing with the details and photos on this page before you order. If you are still unsure, contact MCG Autostyling with your vehicle details and registration, and the team can check the Ashuki H310-31 against your car.

Fitting the Ashuki H310-31

Bearings are often pressed in, so check whether your car needs a press and the right tools before you start. Use the axle nut torque the vehicle maker gives and check the ABS sensor ring where one is fitted.

Work on a level surface with the car safely supported, and use the correct tools and torque settings for your vehicle. Follow any instructions supplied with the Ashuki H310-31. If you are not confident doing the work yourself, have the part fitted by a qualified mechanic or fitter. When the part arrives, check it against this listing before you start work, and keep the packaging until you are happy that everything is correct.

Ashuki H310-31 questions

Will the Ashuki H310-31 fit my car? It fits Honda Prelude (1997-2001). Compare part number H310-31 with the part you are replacing. If they do not match, or you are unsure, ask before ordering.

What should I quote if I contact MCG Autostyling? Quote part number H310-31 and the name Ashuki Wheel Bearing Rear (Prelude 97-01 2.2i), along with your vehicle details, so the team can find the right information quickly.

Is there anything else I should replace at the same time? That depends on the job. Fixings, seals and related wear parts are often worth checking while the area is apart. The related parts below are a good place to start.

Related Ashuki parts

Looking after your car around the Ashuki H310-31

Regular checks help any Wheel Bearing Rear do its job. At each service, look over the area around the part for leaks, damage, loose fixings or wear, and deal with anything you find before it affects other parts. Keep a note of the part numbers you fit, including H310-31, so it is easy to order the same part again or to check compatibility with other parts later.

If you are planning other work on the same car, it can save time to do related jobs together. The vehicle filter on MCG Autostyling helps you find parts for the same car as the Ashuki H310-31, so you can plan the job in one go.

For related parts, see Ashuki Wheel Bearing Rear (Prelude 97-01 2.0i/Civic 95-01 5dr 1.8i VTi), Ashuki Ignition Module (Civic/CRX 87-01/Del Sol/Integra R/Prelude) and Ashuki Lambda Sensor 4-Wire (Civic 91-01/Del Sol/Integra 94-01/Prelude).

Browse the full Ashuki range at MCG Autostyling, or use the vehicle filter to find other parts for your car.

Fits Honda Prelude (1997-2001).