Ashuki Brake Discs Set Front (H038-20)

Description

The Ashuki H038-20 is a Brake Discs Set Front from Ashuki, part number H038-20. It fits Honda Prelude BB1-BB9 (1992-1996). Check the Ashuki H038-20 against your car before you order.

Ashuki H038-20 Details

• Type: Brake Discs Set Front
• Part number: H038-20
• Make: Ashuki
• Spare/Service Parts: Brake Parts
• Fits: Honda Prelude BB1-BB9 (1992-1996)

What a Brake Discs Set Front does

Brake discs give the pads a surface to clamp and they absorb the heat from braking. Diameter, thickness, offset and the number of studs all have to match the hub and caliper, so check these against your car before ordering.

The Ashuki H038-20 is listed under part number H038-20. Part numbers are the most reliable way to match a replacement, because two parts that look alike can differ in size, connection or mounting. If you have the old part in your hand, compare its markings with the H038-20 code, and compare the photos on this page with what is on your car.

Choosing the right Brake Discs Set Front

Start with the vehicle. The Ashuki H038-20 fits Honda Prelude BB1-BB9 (1992-1996). Vehicle specifications can change by market, model year, engine code, body style and trim level, so a car that looks the same from the outside may still need a different part. Check your engine code and chassis code as well as the model name.

If your car has been modified, or has had parts swapped from another model, the part you need may not be the one the factory fitted. In that case, compare the Brake Discs Set Front you are removing with the details and photos on this page before you order. If you are still unsure, contact MCG Autostyling with your vehicle details and registration, and the team can check the Ashuki H038-20 against your car.

Fitting the Ashuki H038-20

Discs are replaced in axle pairs and normally with new pads. Clean the hub face so the disc sits flat, remove any protective coating from the new disc as the maker describes, and bed the pads in gently over the first drives.

Work on a level surface with the car safely supported, and use the correct tools and torque settings for your vehicle. Follow any instructions supplied with the Ashuki H038-20. If you are not confident doing the work yourself, have the part fitted by a qualified mechanic or fitter. When the part arrives, check it against this listing before you start work, and keep the packaging until you are happy that everything is correct.

Ashuki H038-20 questions

Will the Ashuki H038-20 fit my car? It fits Honda Prelude BB1-BB9 (1992-1996). Compare part number H038-20 with the part you are replacing. If they do not match, or you are unsure, ask before ordering.

What should I quote if I contact MCG Autostyling? Quote part number H038-20 and the name Ashuki Brake Discs Set Front, along with your vehicle details, so the team can find the right information quickly.

Is there anything else I should replace at the same time? That depends on the job. Fixings, seals and related wear parts are often worth checking while the area is apart. The related parts below are a good place to start.

Related Ashuki parts

Looking after your car around the Ashuki H038-20

Regular checks help any Brake Discs Set Front do its job. At each service, look over the area around the part for leaks, damage, loose fixings or wear, and deal with anything you find before it affects other parts. Keep a note of the part numbers you fit, including H038-20, so it is easy to order the same part again or to check compatibility with other parts later.

If you are planning other work on the same car, it can save time to do related jobs together. The vehicle filter on MCG Autostyling helps you find parts for the same car as the Ashuki H038-20, so you can plan the job in one go.

For related parts, see Ashuki Brake Discs Set Rear, Ashuki Brake Discs Set Rear and Ashuki Brake Discs Set Rear (5×114.3).

Browse the full Ashuki range at MCG Autostyling, or use the vehicle filter to find other parts for your car.

Fits Honda Prelude BB1-BB9 (1992-1996).