SRS Type 2 Triangle Gasket 63mm (Universal)

Description

This triangle exhaust gasket is the SRS Type 2 flange seal at 63 mm, supplied under SKU GA-C. It is not the house (Type 1) or the oval (Type 3) profile, so check your flange shape before you order. The three-point triangular pattern seats between a downpipe and a manifold or mid-section flange and holds a gas-tight seal once the bolts are pulled up evenly.

Triangle exhaust gasket specs

Universal 63 mm triangle shape, pressed from heat-resistant gasket material and rated for the temperatures a performance exhaust sees day to day. The bore matches 63 mm (2.5 inch) pipework, and the bolt centres follow the standard SRS Type 2 triangular flange used across the SRS range of adapters, silencers and downpipes.

Pair this page with the Type 1 house gasket 63mm and the Type 3 oval gasket 63mm so shoppers can compare and pick the right shape first time. If your flange has two bolts on a rounded oval, you want Type 3; if it is the tall house profile, you want Type 1; if it is triangular, this triangle exhaust gasket is the one.

Genuine SRS parts, stocked and shipped by MCG Autostyling in Kells, Ireland. Fitting: work on a cold exhaust, scrape the old gasket and any sealant off both faces, seat the new triangle exhaust gasket squarely, then tighten the bolts evenly in a cross pattern and re-check them after a short heat cycle.