Audi A4 B6/B7 S-Line Side Skirts (2001-2007)

Description

Audi A4 B6/B7 S-Line Side Skirts (2001-2007)

High Quality Fiberglass S-Line Style Side Skirts to suit Audi A4 B6/B7 01-07

These will fit both the saloon and estate models.

Fiberglass car parts are lightweight, durable, and versatile, but proper installation is essential to achieve a seamless fit and long-lasting performance. Below are some key tips and steps to help ensure successful fitting:

Preparation

1. Inspect the Part:
   • Check for any cracks, imperfections, or damage during shipping. Minor imperfections are common and can usually be sanded or filled.
   • Test the part against the vehicle to assess the initial fit.
2. Prepare the Surface:
   • Clean both the fiberglass part and the car’s surface thoroughly with a degreaser to remove dirt, oil, or contaminants.
   • Sand the edges and contact points of the fiberglass part for a smoother fit.
3. Test Fit:
   • Dry-fit the part on the car without adhesives or fasteners to identify alignment issues or areas that may require trimming.
   • Mark problem areas with tape or a marker for later adjustments.

Adjustment

1. Trimming and Sanding:
   • Use a rotary tool, angle grinder, or sandpaper to trim or reshape areas where the part does not align properly.
   • Work slowly and check the fit frequently to avoid over-trimming.
2. Filling Gaps:
   • Use body filler or fiberglass resin to smooth gaps or imperfections between the part and the vehicle.
   • Sand the filler once it cures to create a smooth surface.
3. Reinforcement:
   • Reinforce weak or thin areas of the part with additional fiberglass layers if necessary, especially around mounting points.

Installation

1. Drilling Mounting Holes:
   • If mounting holes are not pre-drilled, carefully mark their positions during the test fit.
   • Drill small pilot holes first, then enlarge them as needed, using caution to avoid cracking the fiberglass.
2. Securing the Part:
   • Use the appropriate fasteners, such as bolts, screws, or clips, depending on the part and vehicle.
   • Avoid overtightening, as this can crack the fiberglass.
3. Adhesive Application (Recommended Technique):
   • For parts requiring adhesives (e.g., panels or spoilers), use a high-quality automotive adhesive or bonding agent such as tech7, tigerseal, windscreen bond etc.
   • Follow the adhesive manufacturer’s instructions for curing times and application methods.

Finishing

1. Primer and Paint:
   • Fiberglass parts often require a primer before painting. Use an automotive-grade primer and sand lightly between coats.
   • Apply automotive paint in multiple thin layers, allowing adequate drying time between each coat.
2. Protective Coating:
   • Seal the part with a clear coat for added protection against UV rays, dirt, and weather.
3. Final Inspection:
   • Check the alignment and fit after installation. Make any minor adjustments if needed.

Additional Tips

• Professional Installation:
  • If you’re unsure about the process, consider professional fitting and painting services to ensure the best results.
• Follow Manufacturer’s Guidelines:
  • Always consult the manufacturer’s instructions specific to the fiberglass part.
• Regular Maintenance:
  • Inspect the part periodically for any signs of wear, loose fittings, or cracks, and address issues promptly.

Proper preparation and care will result in a flawless look and functional installation of your fiberglass car parts.

All parts MUST always be test fitted before spraying – Sprayed parts cannot be returned!!